V-belt transfers are ideal for medium duty applications and are often used where product could be damaged by strands of chain on heavier duty chain transfers. Unit at left shown with frame cutout for use in belt driven live roller conveyor with 6” wide belting.
| Specifications | TRANSFER ARM: 10 ga. formed channel. TRANSFER BELT: “B” section V-belt. STANDARD LENGTHS: 3′, 4′, 5′ 6′, 7′ and 8′ unit lengths. V-BELT CENTERS: 18″ CENTER DRIVE: Allows reversible unit operation. LIFT: Positive type. BELT SPEED: 35 FPM constant. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CAPACITY: Unit load not to exceed 500 lbs. FLOOR SUPPORTS: Integral part of unit, with adjustment of 18″ to 20″ top of V-belt (down position). MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
VBT3
V-belt transfers are ideal for medium duty applications and are often used where product could be damaged by strands of chain on heavier duty chain transfers. Unit at left shown with frame cutout for use in belt driven live roller conveyor with 6” wide belting.
| Specifications | TRANSFER ARM: 10 ga. formed channel. TRANSFER BELT: “B” section V-belt. STANDARD LENGTHS: 3′, 4′, 5′ 6′, 7′ and 8′ unit lengths. V-BELT CENTERS: 18″ CENTER DRIVE: Allows reversible unit operation. LIFT: Positive type. BELT SPEED: 35 FPM constant. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CAPACITY: Unit load not to exceed 500 lbs. FLOOR SUPPORTS: Integral part of unit, with adjustment of 18″ to 20″ top of V-belt (down position). MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
VBT3
