PC | Parts Conveyor

Category:

Parts conveyors are widely used to convey chips, slugs or scrap materials to hoppers or other containers for disposal or recycling. Model PC, at left is shown with nitrile belt. PC at right includes wire mesh belting. Each PC is supplied with flapper gate at infeed end and right hand drive.

Specifications

BELTING: 3-ply black nitrile belt with 1-1/2″ high molded cleats on 12″ centers; 1/2″ x 1″ flat wire mesh belt with 1-1/2″ high galv. cleats on 12″ centers. NOTE: Units with 6″ wide belt not available with wire mesh belt.

DRIVE PULLEY: 4″ dia. with 1-3/16″ dia. shaft, crowned and fully lagged.

TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft.

BELT RETURN: Formed steel slide retains belt and cleats inside bed.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 60 FPM, constant.

BED: 7″ deep x 12 ga. one piece formed box-type construction.

TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up.

PORTABLE SUPPORT: 4″ dia. casters, tubular construction, adjustable both ends.

GUARD RAILS: 3-1/2″ high x 12 ga. formed steel with gate at infeed.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 330 lbs. total distributed live load at 60 FPM.

ELECTRICAL CONTROLS: Optional

PC

Parts conveyors are widely used to convey chips, slugs or scrap materials to hoppers or other containers for disposal or recycling. Model PC, at left is shown with nitrile belt. PC at right includes wire mesh belting. Each PC is supplied with flapper gate at infeed end and right hand drive.

Specifications

BELTING: 3-ply black nitrile belt with 1-1/2″ high molded cleats on 12″ centers; 1/2″ x 1″ flat wire mesh belt with 1-1/2″ high galv. cleats on 12″ centers. NOTE: Units with 6″ wide belt not available with wire mesh belt.

DRIVE PULLEY: 4″ dia. with 1-3/16″ dia. shaft, crowned and fully lagged.

TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft.

BELT RETURN: Formed steel slide retains belt and cleats inside bed.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 60 FPM, constant.

BED: 7″ deep x 12 ga. one piece formed box-type construction.

TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up.

PORTABLE SUPPORT: 4″ dia. casters, tubular construction, adjustable both ends.

GUARD RAILS: 3-1/2″ high x 12 ga. formed steel with gate at infeed.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 330 lbs. total distributed live load at 60 FPM.

ELECTRICAL CONTROLS: Optional

PC

Accumulation Conveyors(9)

Accumulation

Belt Conveyors(10)

Belt Conveyors

Belt Driven Live Roller(7)

Belt Driven Live Roller

Chain Driven Live Roller(11)

Chain Driven Live Roller

Flexible Conveyors(2)

Flexible Conveyors

Gravity Conveyors(19)

Gravity Conveyors

Line Shaft(9)

Line Shaft

MDZ | Motor Driven Zone Accumulator(2)

MDZ | Motor Driven Zone Accumulator

Parts Conveyor(3)

Parts Conveyor

Plastic Belt(9)

Plastic Belt

Powered Roller(13)

Powered Roller

Slat Conveyors(2)

Slat Conveyors

Transfers(8)

Transfers

Wire Mesh Belt(4)

Wire Mesh Belt

Barrel Conveyors(3)

Barrel Conveyors

Glass & Solar Handling(8)

Glass & Solar Handling

Heavy Duty Conveyors(16)

Heavy Duty Conveyors

Laundry(11)

laundry

Lumber & Door(5)

Lumber

MDR | Motor Driven Roller Smart Conveyors(6)

MDR | Motor Driven Roller Smart Conveyors

Sortation Conveyors(7)

Sortation Conveyors

Special Transfers(11)

Special Transfers

Stackers | Destackers(2)

Stackers/Destackers

Stops | Barriers | Walkovers(10)

Stops | Barriers | Walkovers

Tabletop Chain Conveyors(5)

Tabletop Chain Conveyors

Transfer Carts(9)

Transfer Carts

Turntables(17)

Turntables

Upenders | Downenders | Rollovers(10)

Upenders | Downenders | Rollovers

Vertical Conveyors(8)

Vertical Conveyors

Wheel & Tire Conveyors(4)

Wheel & Tire Conveyors