Indexing powered turntables convey heavy unit loads in numerous applications. A heavy duty chain driven live roller may be mounted on turntable platform and rotated to orient product at specified intervals allowing operator to perform a variety of tasks.
| Specifications | ROTATION: 2 position, 3 position or 4 position. SPEED: 35 FPM at outside diameter. CHAIN DRIVE: No. 80 roller chain. CHAIN GUARD: The chain drive is completely enclosed. CASTERS: (8) 4″ dia. heavy duty rubber-covered casters support rotation of turntable carrier platform. DIAMETER: 3′-0″, 3′-6″, 4′-0″, 4′-6″, 5′-0″, 5′-6″, 6′-0″, 6′-6″, 7′-0″, 7′-6″ and 8′-0″ dia. CARRIER PLATFORM: 3″ structural platform with 1/2″ thick steel plate supported by heavy duty casters. BEARINGS: Heavy duty ball bearing 4-hole flange. CAPACITY: 4000 lbs. max. product load. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor with brake. ELEVATION: Minimum 12-1/2″ to top of plate with (4) structural leveling supports. ELECTRICAL CONTROLS: Limit switches supplied as follows: 2 position = 2 limit switches; 3 position = 3 limit switches; 4 position = 4 limit switches. |
|---|
IPT
Indexing powered turntables convey heavy unit loads in numerous applications. A heavy duty chain driven live roller may be mounted on turntable platform and rotated to orient product at specified intervals allowing operator to perform a variety of tasks.
| Specifications | ROTATION: 2 position, 3 position or 4 position. SPEED: 35 FPM at outside diameter. CHAIN DRIVE: No. 80 roller chain. CHAIN GUARD: The chain drive is completely enclosed. CASTERS: (8) 4″ dia. heavy duty rubber-covered casters support rotation of turntable carrier platform. DIAMETER: 3′-0″, 3′-6″, 4′-0″, 4′-6″, 5′-0″, 5′-6″, 6′-0″, 6′-6″, 7′-0″, 7′-6″ and 8′-0″ dia. CARRIER PLATFORM: 3″ structural platform with 1/2″ thick steel plate supported by heavy duty casters. BEARINGS: Heavy duty ball bearing 4-hole flange. CAPACITY: 4000 lbs. max. product load. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor with brake. ELEVATION: Minimum 12-1/2″ to top of plate with (4) structural leveling supports. ELECTRICAL CONTROLS: Limit switches supplied as follows: 2 position = 2 limit switches; 3 position = 3 limit switches; 4 position = 4 limit switches. |
|---|
IPT
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved