Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
| Specifications | TRANSFER ARM: 7 ga. formed channel. TRANSFER CHAIN: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain. STANDARD LENGTHS: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths. CHAIN CENTERS: 18” CHAIN TAKE-UP: Screw Type. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. LIFT: Pivot type. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CHAIN SPEED: 35 FPM constant. MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor. CAPACITY: 3000 lbs. AIR CONTROLS: Air bag(s) with single solenoid valve. (60-80) psi required. CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also. ELECTRICAL CONTROLS: Optional. |
|---|
CT360
Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
| Specifications | TRANSFER ARM: 7 ga. formed channel. TRANSFER CHAIN: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain. STANDARD LENGTHS: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths. CHAIN CENTERS: 18” CHAIN TAKE-UP: Screw Type. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. LIFT: Pivot type. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CHAIN SPEED: 35 FPM constant. MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor. CAPACITY: 3000 lbs. AIR CONTROLS: Air bag(s) with single solenoid valve. (60-80) psi required. CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also. ELECTRICAL CONTROLS: Optional. |
|---|
CT360
