Roach cross-over module 796LSX was designed to offer a standard component to eliminate confusion over cross-overs. Available in 2’-10’ lengths in 24 hours, Roach model 796LSX is the only component required to cross over drive shaft.
Roach cross-over module 796LSX was designed to offer a standard component to eliminate confusion over cross-overs. Available in 2’-10’ lengths in 24 hours, Roach model 796LSX is the only component required to cross over drive shaft.
| Specifications | TREAD ROLLERS: 1.9” dia. x 16 ga. galvanized , model 196G grooved. DRIVE BELT: 3/16” dia. polyurethane belts; nominal 15 lbs. per roller drive. DRIVE SHAFT: 1” dia. C1018 cold rolled steel shaft. CROSS OVER DIRECTION: Specify “cross over to right hand” or “cross over to left hand”. COUPLINGS: Located on both, one, or no end. SIDE CHANNEL: 7″ x 1-1/2″ x 12 ga. formed steel channel frame. 1/2 HP SUPER E MOTOR (230/460/3) SPEED: 60 FPM. FLOOR SUPPORTS: Optional |
|---|
796LSX
Roach cross-over module 796LSX was designed to offer a standard component to eliminate confusion over cross-overs. Available in 2’-10’ lengths in 24 hours, Roach model 796LSX is the only component required to cross over drive shaft.
| Specifications | TREAD ROLLERS: 1.9” dia. x 16 ga. galvanized , model 196G grooved. DRIVE BELT: 3/16” dia. polyurethane belts; nominal 15 lbs. per roller drive. DRIVE SHAFT: 1” dia. C1018 cold rolled steel shaft. CROSS OVER DIRECTION: Specify “cross over to right hand” or “cross over to left hand”. COUPLINGS: Located on both, one, or no end. SIDE CHANNEL: 7″ x 1-1/2″ x 12 ga. formed steel channel frame. 1/2 HP SUPER E MOTOR (230/460/3) SPEED: 60 FPM. FLOOR SUPPORTS: Optional |
|---|
796LSX
