Roach 751RB is the choice for heavier unit loads. The heavy duty roller bed construction makes model 751RB ideal for transporting heavy loads with low power requirements.
Roach 751RB is the choice for heavier unit loads. The heavy duty roller bed construction makes model 751RB ideal for transporting heavy loads with low power requirements.
| Specifications | BELTING: PVC-120 black. DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft on 15″-39″ BF; 12″ dia. with 1-15/16″ dia. shaft above 39″ BF; both crowned and fully lagged. CARRIER ROLLERS: 2-1/2″ dia. x 11 ga. steel, model 251S. TAIL PULLEY: 4″ dia. with 1-3/16″ dia. shaft on 15″-39″ BF; 6″ dia. with 1-7/16″ dia. shaft above 39″ BF; both crowned. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30′. TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up. BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable. BELT SPEED: 35 FPM, constant. BED: 7″ x 10 ga. channel frame. Bed sections attached with couplings and floor supports. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9″ dia x 12 ga. steel roller, model 192S on 15″-39″BF, 1.9″ x 9 ga. steel, model 199S on 45″-57″ BF. ELECTRICAL CONTROLS: Optional |
|---|
751RB
Roach 751RB is the choice for heavier unit loads. The heavy duty roller bed construction makes model 751RB ideal for transporting heavy loads with low power requirements.
| Specifications | BELTING: PVC-120 black. DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft on 15″-39″ BF; 12″ dia. with 1-15/16″ dia. shaft above 39″ BF; both crowned and fully lagged. CARRIER ROLLERS: 2-1/2″ dia. x 11 ga. steel, model 251S. TAIL PULLEY: 4″ dia. with 1-3/16″ dia. shaft on 15″-39″ BF; 6″ dia. with 1-7/16″ dia. shaft above 39″ BF; both crowned. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30′. TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up. BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable. BELT SPEED: 35 FPM, constant. BED: 7″ x 10 ga. channel frame. Bed sections attached with couplings and floor supports. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9″ dia x 12 ga. steel roller, model 192S on 15″-39″BF, 1.9″ x 9 ga. steel, model 199S on 45″-57″ BF. ELECTRICAL CONTROLS: Optional |
|---|
751RB
