Roach wire mesh belt conveyors can be used in a variety of conditions to convey hot, cold or oily products in oven, cooling or other special conditions.
Roach wire mesh belt conveyors can be used in a variety of conditions to convey hot, cold or oily products in oven, cooling or other special conditions.
| Specifications | BELTING: 1/2″ x 1″ x 11 ga. clinched edge, galvanized wire mesh belt. DRIVE SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft or 8″ dia. sprocket with 1-7/16″ dia. shaft. TAIL SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft. END DRIVE: One-direction unit operation. TAKE-UP: Screw type unit at tail end provides 12″ belt take-up. RETURN ROLLERS: 1.9″ dia. x 16ga. steel, model 196S, adjustable. BED: 7″ x 1-1/2″ x 10 ga. formed channel frame with UHMW wear strips. FLOOR SUPPORTS: Optional. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BELT SPEED: 60 FPM, constant. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
|---|
700SBW
Roach wire mesh belt conveyors can be used in a variety of conditions to convey hot, cold or oily products in oven, cooling or other special conditions.
| Specifications | BELTING: 1/2″ x 1″ x 11 ga. clinched edge, galvanized wire mesh belt. DRIVE SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft or 8″ dia. sprocket with 1-7/16″ dia. shaft. TAIL SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft. END DRIVE: One-direction unit operation. TAKE-UP: Screw type unit at tail end provides 12″ belt take-up. RETURN ROLLERS: 1.9″ dia. x 16ga. steel, model 196S, adjustable. BED: 7″ x 1-1/2″ x 10 ga. formed channel frame with UHMW wear strips. FLOOR SUPPORTS: Optional. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BELT SPEED: 60 FPM, constant. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
|---|
700SBW
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved