TREAD ROLLERS: 3-1/2″ dia. x .300 wall steel, model 3530S with sprockets.

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum).

BED LENGTHS (6″ RC, #60 CHAIN AND 12″ RC, #80 CHAIN): Intermediate bed section lengths 3′-0″, 4′-0″, 5′-0″, 6′-0″, 7′-0″, 8′-0″, 9′-0″ and 10′-0″ increments. Minimum overall conveyor length with drive 5′-0″. Maximum overall conveyor length 80′-0″.

BED LENGTHS (7-1/2″ RC, #80 CHAIN): Intermediate bed section lengths 3′-1-1/2″, 3′-9″, 4′-4-1/2″, 5′-0″, 5′-7-1/2″, 6′-3″, 6′-10-1/2″, 7′-6″, 8′-1-1/2″, 8′-9″, 9′-4-1/2″ and 10′-0″. Minimum overall conveyor length with drive 5′-0″. Maximum overall conveyor length 80′-0″.

ROLLER CENTERS: 6″ with No. 60 chain; 7-1/2″ and 12″ with No. 80 chain.

CHAIN DRIVE: Roller to roller with No. 60 or No. 80 roller chain.

SPEED: 35 FPM, constant.

BED: 6″ at 8.2 lbs. and 8″ at 11.5 lbs. structural steel frame. Bed sections attached with couplings and floor supports.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CAPACITY: 2500 lbs. per roller.

FLOOR SUPPORTS: Optional

ELECTRICAL CONTROLS: Optional