351TCDLRC is a true taper heavy duty chain driven live roller curve. Ideal for conveying pallets or other heavy unit loads, this conveyor features “true taper” to maintain product orientation throughout the curve.
351TCDLRC is a true taper heavy duty chain driven live roller curve. Ideal for conveying pallets or other heavy unit loads, this conveyor features “true taper” to maintain product orientation throughout the curve.
| Specifications | TREAD ROLLERS: Heavy duty 11 ga. tapered rollers, model 351T with sprockets, for true taper effect. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 35 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 5″ at 6.7 lbs. and 7″ at 9.8 lbs. structural steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional |
|---|
351TCDLRC
351TCDLRC is a true taper heavy duty chain driven live roller curve. Ideal for conveying pallets or other heavy unit loads, this conveyor features “true taper” to maintain product orientation throughout the curve.
| Specifications | TREAD ROLLERS: Heavy duty 11 ga. tapered rollers, model 351T with sprockets, for true taper effect. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 35 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 5″ at 6.7 lbs. and 7″ at 9.8 lbs. structural steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional |
|---|
351TCDLRC
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MCS | Modular Connect System
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Singulation
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved