254TCDLRC | Chain Driven Medium Duty Tapered Roller Live Roller Conveyor Curve

Category: Chain Driven Live Roller

Description
Specs

Model 254TCDLRC is a medium duty TAPERED ROLLER chain driven live roller curve, designed to transport medium duty loads such as castings, drums or pallet loads. Orientation of pallet loads are maintained when using this chain driven live roller curve.

Specifications	TREAD ROLLERS: 2-1/2″ dia. to 1-11/16″ dia. x 14 ga. steel tapered rollers, model 254T with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 45 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 6″ x 1-1/2″ x 10 ga. and 4″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional

Specifications

TREAD ROLLERS: 2-1/2″ dia. to 1-11/16″ dia. x 14 ga. steel tapered rollers, model 254T with sprockets.

CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.

END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.

ROLLER CENTERS: 6″ RC measured at outside radius of curve.

SPEED: 45 FPM, constant.

BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.

BED: 6″ x 1-1/2″ x 10 ga. and 4″ x 1-1/2″ x 10 ga. formed steel channel frame.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).

ELECTRICAL CONTROLS: Optional

254TCDLRC

Description
Specs

Specifications	TREAD ROLLERS: 2-1/2″ dia. to 1-11/16″ dia. x 14 ga. steel tapered rollers, model 254T with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 45 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 6″ x 1-1/2″ x 10 ga. and 4″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional