251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
| Specifications | TREAD ROLLERS: 2-1/2″ dia. x 11 ga. steel, model 251S with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. BEARINGS: Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed. ROLLER CENTERS: 6″ RC measured at outside radius of curve. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. SPEED: 35 FPM, constant. BED: 6″ x 1-1/2″ x 7 ga. and 4″ x 1-1/2″ x 7 ga. formed steel channel frame. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). FLOOR SUPPORTS: Optional ELECTRICAL CONTROLS: Optional |
|---|
251CDLRC
251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
| Specifications | TREAD ROLLERS: 2-1/2″ dia. x 11 ga. steel, model 251S with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. BEARINGS: Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed. ROLLER CENTERS: 6″ RC measured at outside radius of curve. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. SPEED: 35 FPM, constant. BED: 6″ x 1-1/2″ x 7 ga. and 4″ x 1-1/2″ x 7 ga. formed steel channel frame. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). FLOOR SUPPORTS: Optional ELECTRICAL CONTROLS: Optional |
|---|
251CDLRC
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved