SZA192CDA SMART ZONE® is a medium duty roll-to-roll chain driven zero pressure accumulator, designed to safely accumulate medium duty loads in 5’ zones. Roach SMART ZONE®incorporates photo electric sensors to detect product loads instead of sensor rollers-which eliminates many problems associated with sensor rollers. Products do not touch during accumulation and are singulated individually off of conveyor. SMART ZONE® is easy to install and simple to maintain.
| Specifications | TREAD ROLLERS: 1.9″ dia. x 12 ga., model 192S. CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain. CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor. CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units. ROLLER CENTERS: 4″ or 6″ RC ONLY. SPEED: 35 FPM, constant. ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max). BED: 6-1/2″ x 1-1/2″ x 10 ga. and 4-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports. FLOOR SUPPORTS: Optional BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal. FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. CAPACITY: 300 lbs./ft. up to a maximum of 1200 lb. pallet load. ELECTRICAL CONTROLS: Optional |
|---|
SZA192CDA
SZA192CDA SMART ZONE® is a medium duty roll-to-roll chain driven zero pressure accumulator, designed to safely accumulate medium duty loads in 5’ zones. Roach SMART ZONE®incorporates photo electric sensors to detect product loads instead of sensor rollers-which eliminates many problems associated with sensor rollers. Products do not touch during accumulation and are singulated individually off of conveyor. SMART ZONE® is easy to install and simple to maintain.
| Specifications | TREAD ROLLERS: 1.9″ dia. x 12 ga., model 192S. CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain. CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor. CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units. ROLLER CENTERS: 4″ or 6″ RC ONLY. SPEED: 35 FPM, constant. ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max). BED: 6-1/2″ x 1-1/2″ x 10 ga. and 4-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports. FLOOR SUPPORTS: Optional BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal. FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. CAPACITY: 300 lbs./ft. up to a maximum of 1200 lb. pallet load. ELECTRICAL CONTROLS: Optional |
|---|
SZA192CDA
