Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet loads, use model 254TCDLRC, opposite page, to maintain product orientation.
Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet loads, use model 254TCDLRC, opposite page, to maintain product orientation.
| Specifications | TREAD ROLLERS: 1.9″ dia. x 12 ga. steel, model 192S with sprockets. CHAIN DRIVE: Roller to roller with No. 40 circular roller chain. END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. ROLLER CENTERS: 5″ RC measured at outside radius of curve. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). SPEED: 45 FPM, constant. BEARINGS: Removable type, zinc-plated, grease packed, labyrinth sealed. BED: 5-1/2″ x 1-1/2″ x 10 ga. and 3-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
192CDLRC
Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet loads, use model 254TCDLRC, opposite page, to maintain product orientation.
| Specifications | TREAD ROLLERS: 1.9″ dia. x 12 ga. steel, model 192S with sprockets. CHAIN DRIVE: Roller to roller with No. 40 circular roller chain. END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. ROLLER CENTERS: 5″ RC measured at outside radius of curve. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). SPEED: 45 FPM, constant. BEARINGS: Removable type, zinc-plated, grease packed, labyrinth sealed. BED: 5-1/2″ x 1-1/2″ x 10 ga. and 3-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
192CDLRC
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved