The 796LSS converging spur module allows secondary lanes to merge product flows onto a main conveyor line. Designed to be driven off a primary 796LS drive shaft, it reduces the need for local motors while maintaining consistent drive engagement throughout the spur section.
This component enhances material flow where multiple feed lines converge, supporting facility layouts that require efficient merging points without complicated motor control.
Applications
- Carton accumulation and release zones
- Order fulfillment conveyor lines
- Sortation in low to moderate speed systems
- Packaging and operations
- Transfer between processing stations
Industries
- Distribution and fulfillment
- E-commerce operations
- Light manufacturing
- Packaging and assembly
- Third-party logistics
SPECIFICATIONS
| BF | 30°, 45° - 15", 19", 21", 25", 27", 33", 39" |
| OAW | 30°, 45° - 18", 22", 24", 28", 30", 36", 42" |
| TREAD ROLLERS | 1.9" dia. x 16 ga. galvanized, model 196G grooved, 3" centers |
| DRIVE BELT | 3/16" dia. polyurethane belts; nominal 15 lbs. per roller drive |
| DRIVE SHAFT | 1" dia. C1018 cold rolled steel shaft |
| COUPLINGS | Located on both or one ends |
| UNIVERSAL JOINTS | 4 per 90° and 60° curve; 2 per 45° and 30° curve |
| BED / FRAME | 7" x 1-1/2" x 12 ga. formed steel channel frame |
| ROLLER CHAIN | Spur driven via crossover with No. 40 chain |
| CHAIN | No. 50 roller chain |
| MOTOR DRIVE | Unit is designed to be driven by 796LS |
| FLOOR SUPPORTS | Optional |
DETAILS
ACCESORIES / OPTIONS
Side Mounted Drive
Floor Supports
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
