The 796LSG gate module creates an accessible operator passage through a conveyor line while still being driven by the existing line shaft system. Gas cylinder assist raises or lowers the gate section, enabling safe and frequent crossing points in busy production or handling areas.
This feature is particularly valuable where personnel or mobile equipment must traverse conveyor lines without interrupting the material path or adding separate drive units.
Applications
- Carton accumulation and release zones
- Order fulfillment conveyor lines
- Sortation in low to moderate speed systems
- Packaging and operations
- Transfer between processing stations
Industries
- Distribution and fulfillment
- E-commerce operations
- Light manufacturing
- Packaging and assembly
- Third-party logistics
SPECIFICATIONS
| BF | 15", 19", 21", 25", 27", 33", 39" |
| OAW | 18", 22", 24", 28", 30", 36", 42" |
| TREAD ROLLERS | .9" dia. x 16 ga. galvanized, model 196G grooved |
| DRIVE BELT | 3/16" dia. polyurethane belts; nominal 15 lbs. per roller drive |
| DRIVE SHAFT | 1" dia. C1018 cold rolled steel shaft |
| BED / FRAME | 7" x 1-1/2" x 12 ga. formed steel channel frame; horizontal section is 24" long |
| COUPLINGS | Located on one end only |
| LIFT | Gas cylinder provides assist for raising / lowering |
| MOTOR DRIVE | Unit is designed to be driven by 796LS |
| SPECIFY HAND | Specify if gate is left hand or right hand |
| FLOOR SUPPORTS | Optional |
DETAILS
ACCESORIES / OPTIONS
Side Mounted Drive
Floor Supports
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
