The CT380 model shares the core design philosophy of the CT360 but uses a larger flat side bar chain for increased load capacity and rigidity in heavy duty material handling. Like CT360, the CT380 facilitates right angle redirection of pallets or unit loads where space constraints prevent the use of wide turning curves. The transfer arm and drive components are engineered to support high capacity operation and maintain alignment with the adjoining conveyor lines.
This transfer can be configured with pivot or positive lift mechanisms and may incorporate optional features such as varied chain centers or motor specifications to match specific production demands. Pneumatic lift systems manage the transition of the chain strands into position, and the assembly is built with industrial grade bearings and housings for durability.
Applications
- Right angle transfers between parallel conveyor runs
- Product routing to multiple downstream lines
- Pallet turning or reorientation within a conveyor cell
- Carton diverting in accumulation or sortation areas
- Controlled transfers in limited floor space layouts
Industries
- Manufacturing and assembly operations
- Distribution and fulfillment centers
- Packaging and converting facilities
- Food and beverage processing
- Consumer goods and industrial products handling
SPECIFICATIONS
| TRANSFER ARM | 7 ga. formed channel |
| TRANSFER CHAIN | No. 80 flat side bar chain (model CT380) |
| STANDARD LENGTHS | 3 ft, 4 ft, 5 ft, 6 ft, 7 ft, and 8 ft unit lengths |
| CHAIN CENTERS | 18 in |
| CHAIN TAKE-UP | Screw type |
| END DRIVE | Allows one-direction unit operation; optional center drive for reversible applications |
| LIFT | Pivot type |
| BEARINGS | Heavy duty, lubricated ball bearing unit with cast iron housings |
| CHAIN SPEED | 35 FPM constant |
| MOTOR DRIVE | 1/2 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| CAPACITY | 3000 lb |
| AIR CONTROLS | Air bag(s) with single solenoid valve; 60 to 80 PSI required |
| CUTOUTS | Required through conveyor frame transfer mounts when using end drive; may be required for center drive applications |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
Strand Count
Positive Lift
FRL
Floor Supports
Chain Center
Chain Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
