The 297CDLR is a heavy duty conveyor tailored for transporting substantial loads such as palletized products, drums, or castings in environments where oil, dust, or contaminants may be present. It uses a chain driven live roller configuration with larger tread rollers and a structural frame that supports high load capacities.
Reversible drive options and enclosed chain guards enhance installation flexibility and protect internal components. The conveyor is engineered for torque and load carrying rather than high speeds, providing reliable propulsion under sustained heavy duty use.
Applications
- Pallet handling lines
- Drum conveying systems
- 90° transfers onto or off of conveyor lines
- Accumulation zones with controlled indexing
- Dirty or oil-exposed operating areas
- Specialty environments including washdown, freezer, and oven applications
Industries
- Manufacturing and assembly operations
- Distribution and fulfillment centers
- Food and beverage processing
- Packaging and material handling integrators
- Automotive and heavy equipment manufacturing
SPECIFICATIONS
| CONVEYING SURFACE | 12", 18", 24", 30", 36", 42", 48", 51", 54", 60" |
| BF | 15", 21", 27", 33", 39", 45", 51", 54", 57", 63" |
| OAW | 18", 24", 30", 36", 42", 48", 54", 57", 60", 66" |
| TREAD ROLLERS | 2-9/16″ dia. x 7 ga. steel rollers, model 297S with sprockets. |
| CHAIN DRIVE | Roller to roller with No. 60 roller chain. |
| ROLLER CENTERS | 4-1/2″, 6″, 9″ or 12″. |
| CENTER DRIVE | Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. |
| BED / FRAME | 4″ at 5.4 lbs. and 6″ at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports. |
| SPEED | 35 FPM, constant. |
| BEARINGS | Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum). |
| CHAIN GUARD | The chain drive is completely enclosed along the entire length of the conveyor. |
| BED LENGTHS (4-1/2″ OR 9″ RC) | Intermediate bed section lengths 3′-0″, 3′-9″, 4′-6″, 5′-3″, 6′-0″, 6′-9″, 7′-6″, 8′-3″, 9′-0″ and 9′-9″ increments. Minimum overall conveyor length with drive 5′-3″. Maximum overall conveyor length: 58′-6″ with 4-1/2″ RC; 78′-0″ with 9″ RC. |
| BED LENGTHS (6″ OR 12″ RC) | Intermediate bed section lengths are available in 1′-0″ increments. Minimum overall conveyor length with drive 5′-0″. Maximum overall conveyor length 80′-0″. |
| MOTOR DRIVE | 3/4 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| FLOOR SUPPORTS | Optional |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
Speed
Motors
Floor Supports
Undertrussed Bed
Ceiling Hangers
Guard Rails
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
