The 251CDLRC combines heavy duty CDLR design with a curve to enable directional transitions for large unit loads in industrial layouts. Its positive chain-to-roller drive transmits torque through each roller around the curve, offering dependable motion with substantial loads where product orientation through the curve is not critical.
Robust frame construction and reversible drive options support integration into heavy material handling systems with space limitations or irregular pathways.
Applications
- Pallet handling lines
- Drum conveying systems
- 90° transfers onto or off of conveyor lines
- Accumulation zones with controlled indexing
- Dirty or oil-exposed operating areas
- Specialty environments including washdown, freezer, and oven applications
Industries
- Manufacturing and assembly operations
- Distribution and fulfillment centers
- Food and beverage processing
- Packaging and material handling integrators
- Automotive and heavy equipment manufacturing
SPECIFICATIONS
| CONVEYING SURFACE | 12", 18", 24", 30", 36", 42", 48", 51", 54", 60" |
| BF | 15", 21", 27", 33", 39", 45", 51", 54", 57", 63" |
| OAW | 18-1/4", 24-1/4", 30-1/4", 36-1/4", 42-1/4", 48-1/4", 54-1/4", 57-1/4", 60-1/4", 66-1/4" |
| TREAD ROLLERS | 2-1/2″ dia. x 11 ga. steel, model 251S with sprockets. |
| CHAIN DRIVE | Roller to roller with No. 60 circular roller chain. |
| END DRIVE | Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. |
| BEARINGS | Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed. |
| ROLLER CENTERS | 6″ RC measured at outside radius of curve. |
| MOTOR DRIVE | 3/4 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| SPEED | 35 FPM, constant. |
| BED / FRAME | 6″ x 1-1/2″ x 7 ga. and 4″ x 1-1/2″ x 7 ga. formed steel channel frame. |
| CHAIN GUARD | The chain drive is completely enclosed along the entire length of the conveyor. |
| DRIVE LOCATION | Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). |
| FLOOR SUPPORTS | Optional |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
Speed
Motors
Floor Supports
Undertrussed Bed
Ceiling Hangers
Guard Rails
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
