The 796CALR is a medium duty cam adjusted live roller conveyor that balances load capacity with adjustable engagement. The integrated cam mechanism enables rapid adjustment of roller pressure to accommodate variations in conveyed product weight or spacing requirements.
Designed with a reversible center drive and formed channel frame, it supports typical medium duty system applications where side loading, unloading, or temporary accumulation occurs. Its construction and bearing design provide durability in industrial environments while allowing for integration with floor supports and system controls.
Applications
- Accumulation and release of cartons and totes
- Zero to low pressure product conveying
- Product routing through curves, spurs, and merges
- Zoned conveying with sensor and control logic
- Unit handling in packaging and assembly lines
- Transfer between processing, sorting, and palletizing areas
Industries
- Distribution and fulfillment centers
- Manufacturing and assembly operations
- Packaging and labeling facilities
- E-commerce order processing
- Consumer goods handling
- Controlled indoor industrial environments
SPECIFICATIONS
| BF | 15", 19", 21", 25", 27", 33", 39" |
| OAW | 18", 22", 24", 28", 30", 36", 42" |
| TREAD ROLLERS | 1.9 in dia. x 16 ga. steel rollers, model 196S |
| PRESSURE ROLLERS | 1.9 in dia. x 16 ga. steel rollers, model 196S, cam adjustable |
| BELTING | 6 in wide black PVC-120 COS |
| CENTER DRIVE | Reversible drive with 24 in integral belt take-up. Units under 8 ft overall length require stacked drive components. Consult factory for minimum unit elevation |
| SQUARING RODS | Adjustable rods on underside of bed allow frame to be squared for improved belt tracking; standard on all units over 30 ft |
| DRIVE PULLEY | 4 in dia. with 1-3/16 in shaft or 8 in dia. with 1-7/16 in shaft; both crowned and fully lagged |
| END PULLEY | 4 in dia., crowned, with 1-3/16 in shaft |
| RETURN ROLLERS | 1.9 in dia. x 16 ga. steel rollers, model 196S |
| BED / FRAME | 6 in x 1-1/2 in x 12 ga. channel frame slotted for tread rollers to pop-out. Rollers must be retained at 7 ft elevation or higher. Specify desired elevation. Bed sections attached with couplings and floor supports |
| FLOOR SUPPORTS | SM-6 adjustable 31-1/2 in to 43-1/2 in TOR. Supports should be lagged to floor |
| BEARINGS | Precision heavy duty lubricated ball bearing units with cast iron housings |
| ROLLER CHAIN | Drive pulley driven by No. 50 chain for 1-1/2 HP or less and No. 60 chain for larger drives. Chain take-up provided on motor base |
| MOTOR DRIVE | 1/2 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| SPEED | 60 FPM constant |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
End Drive
Side Mounted End Drive
Auxiliary Take-up
Floor Supports
Ceiling Hangers
Guard Rails
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
