The 638CALR is a light duty cam adjusted live roller conveyor providing horizontal conveying with the ability to adjust pressure roller engagement quickly via a cam mechanism. It is designed for horizontal transport where side loading, unloading, transfer, or temporary holding of items is required.
This model uses a belt driven design to impart low pressure motion and accumulation characteristics, making it suitable for warehousing, order fulfillment, and light manufacturing applications where consistent product movement and spacing are needed.
Applications
- Accumulation and release of cartons and totes
- Zero to low pressure product conveying
- Product routing through curves, spurs, and merges
- Zoned conveying with sensor and control logic
- Unit handling in packaging and assembly lines
- Transfer between processing, sorting, and palletizing areas
Industries
- Distribution and fulfillment centers
- Manufacturing and assembly operations
- Packaging and labeling facilities
- E-commerce order processing
- Consumer goods handling
- Controlled indoor industrial environments
SPECIFICATIONS
| BF | 10", 16", 22" |
| OAW | 13", 19", 25" |
| RETURN ROLLERS | 1-3/8 in dia. x 18 ga. galvanized steel rollers, model 138G with 5/16 in hex, adjustable |
| BELTING | 6 in wide black PVC-120 COS |
| CENTER DRIVE | Reversible drive with 24 in integral belt take-up. Specify location |
| DRIVE PULLEY | 4 in dia. with 1-3/16 in shaft or 8 in dia. with 1-7/16 in shaft; both crowned and fully lagged |
| END PULLEY | 4 in dia., crowned, with 1-3/16 in shaft |
| SPEED | 60 FPM constant |
| MOTOR DRIVE | 1/2 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| BED | 6 in x 1-1/2 in x 12 ga. channel frame slotted for tread rollers to pop-out. Rollers must be retained at 7 ft elevation or higher. Specify desired elevation. Bed sections attached with couplings and floor supports |
| SQUARING RODS | Adjustable rods on underside of bed allow frame to be squared for improved belt tracking; standard on all units over 30 ft |
| FLOOR SUPPORTS | Optional |
| BEARINGS | Precision heavy duty lubricated ball bearing units with cast iron housings |
| ROLLER CHAIN | Drive pulley driven by No. 50 chain for 1-1/2 HP or less and No. 60 chain for larger drives. Chain take-up provided on motor base |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
End Drive
Side Mounted End Drive
Auxiliary Take-up
Floor Supports
Ceiling Hangers
Guard Rails
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
