The 196LRC medium duty belt driven live roller curve integrates tapered rollers with adjustable belt tensioning to preserve product alignment through curved sections. It is reversible and frequently employed as a driven curve within medium duty live roller systems.
Engineered for higher load capacities than light duty curves, this model uses a robust formed steel frame and precision bearings to support sustained operation in manufacturing and distribution layouts requiring directional changes. Integrated take-up and drive placements facilitate belt tension control and conveyor alignment.
Applications
- Accumulation and release of cartons and totes
- Zero to low pressure product conveying
- Product routing through curves, spurs, and merges
- Zoned conveying with sensor and control logic
- Unit handling in packaging and assembly lines
- Transfer between processing, sorting, and palletizing areas
Industries
- Distribution and fulfillment centers
- Manufacturing and assembly operations
- Packaging and labeling facilities
- E-commerce order processing
- Consumer goods handling
- Controlled indoor industrial environments
SPECIFICATIONS
| BF | 13", 15", 17", 19", 21", 23", 25", 27", 31", 33", 37", 39" |
| OAW | 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", 42" |
| TREAD ROLLERS | 2-1/2 in dia. to 1-11/16 in dia. x 14 ga. steel tapered rollers, model 254T; 1.9 in dia. x 16 ga. steel straight tangent rollers, model 196S |
| PRESSURE SHEAVES | Provides drive belt pressure to upper tread rollers |
| BELTING | B section V-belt |
| TAKE-UP | Screw type adjustable sheave with flat idler sheaves to maintain belt tension |
| TANGENTS | 1 ft 0 in both ends on 90 degree; 1 ft 6 in both ends on 45 degree; 1 ft 0 in both ends on 180 degree. Tangent roller centers provided on 3 in RC |
| SPEED | 60 FPM constant |
| BED | 7 in x 1-1/2 in x 12 ga. formed steel channel frame |
| BEARINGS | Precision heavy duty lubricated ball bearing units with cast iron housings |
| ROLLER CHAIN | Drive shaft driven by No. 50 chain |
| FLOOR SUPPORTS | Optional |
| DRIVE LOCATION | Drive located on outside of curve; specify left hand tangent length, right hand tangent length, and left hand drive or right hand drive (reference point at outside of curve). For slave-driven models, specify drive shaft location |
| CAPACITY | 500 lb total distributed live load |
| MOTOR DRIVE | 1/2 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| SPECIAL WIDTHS | Consult factory for pricing of all widths not shown |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
End Drive
Side Mounted End Drive
Auxiliary Take-up
Floor Supports
Ceiling Hangers
Guard Rails
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
