The 138LRC is a light duty belt driven live roller curve conveyor engineered to maintain product orientation through turns using tapered rollers. Its design supports reversible operation and is commonly configured as a driven curve in light duty conveying systems where changes in direction are required.
Constructed on a formed steel frame with adjustable take-up and drive components positioned outside the curve, the model is suited for integration into system layouts with multiple curves or transitions. The tapered rollers and belt pressure sheaves ensure consistent roller engagement through moderate load curves typical of carton, tote, and unit load applications.
Applications
- Accumulation and release of cartons and totes
- Zero to low pressure product conveying
- Product routing through curves, spurs, and merges
- Zoned conveying with sensor and control logic
- Unit handling in packaging and assembly lines
- Transfer between processing, sorting, and palletizing areas
Industries
- Distribution and fulfillment centers
- Manufacturing and assembly operations
- Packaging and labeling facilities
- E-commerce order processing
- Consumer goods handling
- Controlled indoor industrial environments
SPECIFICATIONS
| BF | 90° - 10", 16", 22" | 45° - 10", 16", 22" |
| OAW | 90° - 13", 19", 25" | 45° - 13", 19", 25" |
| TREAD ROLLERS | 1.9 in dia. to 1-3/8 in dia. x 16 ga. tapered rollers, model 138T; 1-3/8 in dia. x 18 ga., model 138G with 5/16 in hex, galvanized straight tangent rollers |
| ROLLER CENTERS | 1-9/16 in measured at inside radius of unit |
| PRESSURE SHEAVES | Provides drive belt pressure to upper tread rollers |
| BELTING | B section V-belt |
| TAKE-UP | Screw type adjustable sheave with flat idler sheaves to maintain belt tension |
| TANGENTS | 12 in both ends on 90 degree unit; 18 in both ends on 45 degree unit |
| BED | 6 in x 1-1/2 in x 12 ga. formed steel channel frame |
| BEARINGS | Precision heavy duty lubricated ball bearing units with cast iron housings |
| ROLLER CHAIN | Drive shaft driven by No. 50 chain |
| FLOOR SUPPORTS | Optional |
| MOTOR DRIVE | 1/2 HP, 230/460/3, 60 cycle, Super "E" right angle gear motor |
| DRIVE LOCATION | Drive located on outside of curve; specify left hand or right hand drive and tangent lengths |
| CAPACITY | 300 lb total distributed live load |
| SPEED | 60 FPM constant |
DETAILS
ACCESORIES / OPTIONS
End Drive
Side Mounted End Drive
Auxiliary Take-up
Floor Supports
Ceiling Hangers
Guard Rails
Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
