The 751RB heavy duty roller bed belt conveyor accommodates higher weight unit loads by incorporating rollers beneath the belt to reduce frictional resistance. This design increases capacity and efficiency for rigid, dense products such as automotive components or large cartons.
Roller beds extend belt life and support longer conveyor runs under load, making this model a strong choice for heavy duty transport, inspection staging, or integration with other high load conveyors in manufacturing and distribution centers.
Applications
- Convey cartons and cardboard boxes
- Transport totes and reusable containers
- Move fixtures and work-in-process components
- Meter and space packages for downstream equipment
- Accumulate or brake products between process steps
- Elevate or lower unit loads between operating levels
Industries
- Warehousing and distribution centers
- Manufacturing and assembly operations
- Packaging and fulfillment lines
- Inspection, testing, and quality control areas
- Material handling and logistics facilities
Special Applications
- Heavy duty structural components allow the 751RB to convey 1200 pounds of sheet steel at 300 fpm. | image ref#486460
SPECIFICATIONS
| TYPE | Roller bed heavy duty belt conveyor |
| BELT WIDTH | 12", 18", 24", 30", 36", 42", 48", 54" |
| BELTING | PVC-120 black |
| DRIVE PULLEY | 8" dia. with 1-7/16" dia. shaft (15"-39" BF); 12" dia. with 1-15/16" dia. shaft (above 39" BF); crowned and fully lagged |
| CARRIER ROLLERS | 2-1/2" dia. x 11 ga. steel, model 251S |
| TAIL PULLEY | 4" dia. with 1-3/16" dia. shaft (15"-39" BF); 6" dia. with 1-7/16" dia. shaft (above 39" BF); crowned |
| DRIVE ARRANGEMENT | End drive for one-direction; optional center drive for reversible application |
| SQUARING RODS | Adjustable rods on underside of bed; standard on all units over 30' |
| TAKE-UP | Screw type at tail pulley provides 12" belt take-up |
| BEARINGS | Precision, heavy duty, lubricated ball bearing units with cast iron housings |
| RETURN ROLLERS | 1.9" dia. x 16 ga. steel, model 196S, adjustable |
| BELT SPEED | 35 FPM, constant |
| BED / FRAME | 7" x 10 ga. channel frame; bed sections attached with couplings and floor supports |
| FLOOR SUPPORTS | Optional |
| MOTOR DRIVE | 1 HP, 230/460/3, 60 cycle, Super "E" ODP right angle gear motor |
| ROLLER CHAIN | No. 50 chain for 1-1/2 HP or less; No. 60 chain on larger drives; chain take-up on motor base |
| SAFETY POP-OUT ROLLERS | Standard on both ends: 1.9" dia. x 12 ga. steel (model 192S) on 15"-39" BF; 1.9" x 9 ga. steel (model 199S) on 45"-57" BF |
| ELECTRICAL CONTROLS | Optional |
DETAILS
ACCESORIES / OPTIONS
Center Drive
Side Mounted End Drive
Overhead End Drive
Auxiliary Take-up
Side Tables
Floor Supports
Nose-Over
Undertrussed Bed
Ceiling Hangers
Guard Rails
Belt Speed
Motors
Controls
WARRANTY
Electrical: 12 Months
Mechanical: 12 Months
SERVICES
Technical Support
Installation & Service
Preventative & Routine Maintenance
Application Support
Operator & Maintenance Training
