Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
| Specifications | TRANSFER ARM: 7 ga. formed channel. TRANSFER CHAIN: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain. STANDARD LENGTHS: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths. CHAIN CENTERS: 18” CHAIN TAKE-UP: Screw Type. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. LIFT: Pivot type. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CHAIN SPEED: 35 FPM constant. MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor. CAPACITY: 3000 lbs. AIR CONTROLS: Air bag(s) with single solenoid valve. (60-80) psi required. CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also. ELECTRICAL CONTROLS: Optional. |
|---|
CT360
Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
| Specifications | TRANSFER ARM: 7 ga. formed channel. TRANSFER CHAIN: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain. STANDARD LENGTHS: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths. CHAIN CENTERS: 18” CHAIN TAKE-UP: Screw Type. END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. LIFT: Pivot type. BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings. CHAIN SPEED: 35 FPM constant. MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor. CAPACITY: 3000 lbs. AIR CONTROLS: Air bag(s) with single solenoid valve. (60-80) psi required. CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also. ELECTRICAL CONTROLS: Optional. |
|---|
CT360
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MCS | Modular Connect System
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Singulation
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved