The Narrow Belt Sorter utilizes multiple belts to transport product to diverters that have been strategically located along the sorter. Both the Skewed Wheel Diverter and the Roller Diverter can be used as the means of diverting from the Narrow Belt Sorter.
| Specifications | BELTING: Ultimate 240, 1-1/4” wide running on UHMW guide tracks on 3-1/2” centers. DRIVE PULLEY: 8” dia. with 1-7/16” dia. shaft, both machine crowned and fully lagged. TAIL PULLEY: 4” dia., machine crowned, with 1-3/16” dia. shaft. SAFETY POP-OUT ROLLER: Standard on both ends, 1.9” dia. x 16 ga. galv. steel roller, model 196G. TAKE-UP: Pneumatic belt tension mechanism BELT SPEED: 300 FPM, maximum (speeds are dependent up upon product size and weight) AIR CONTROLS: Single solenoid 60 PSI required CAPACITY: Product not to exceed 60 lbs. 90° ROLLER TRANSFER: Model 156 high speed 1-1/2” x 16 ga. rollers with urethane covering. Single or bi-directional. 30° SKEWED WHEEL DIVERTER: Urethane covered drive wheels. Single direction only. Guard rails on takeaway spur conveyor may be required. DIVERTER DRIVE: Independently driven RATE: Up to 60 sorts per minute. |
|---|
Narrow Belt Sorter
The Narrow Belt Sorter utilizes multiple belts to transport product to diverters that have been strategically located along the sorter. Both the Skewed Wheel Diverter and the Roller Diverter can be used as the means of diverting from the Narrow Belt Sorter.
| Specifications | BELTING: Ultimate 240, 1-1/4” wide running on UHMW guide tracks on 3-1/2” centers. DRIVE PULLEY: 8” dia. with 1-7/16” dia. shaft, both machine crowned and fully lagged. TAIL PULLEY: 4” dia., machine crowned, with 1-3/16” dia. shaft. SAFETY POP-OUT ROLLER: Standard on both ends, 1.9” dia. x 16 ga. galv. steel roller, model 196G. TAKE-UP: Pneumatic belt tension mechanism BELT SPEED: 300 FPM, maximum (speeds are dependent up upon product size and weight) AIR CONTROLS: Single solenoid 60 PSI required CAPACITY: Product not to exceed 60 lbs. 90° ROLLER TRANSFER: Model 156 high speed 1-1/2” x 16 ga. rollers with urethane covering. Single or bi-directional. 30° SKEWED WHEEL DIVERTER: Urethane covered drive wheels. Single direction only. Guard rails on takeaway spur conveyor may be required. DIVERTER DRIVE: Independently driven RATE: Up to 60 sorts per minute. |
|---|
Narrow Belt Sorter
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MCS | Modular Connect System
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Singulation
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved