Ideal for general goods transportation in applications such as packing, testing, inspecting and various assembly line operations. Belt tracking problems are eliminated with model 700PB.
Ideal for general goods transportation in applications such as packing, testing, inspecting and various assembly line operations. Belt tracking problems are eliminated with model 700PB.
| Specifications | BELTING: Series 900 flat top gray polypropylene belt, FDA approved belt. DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore. TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore. END DRIVE: Allows one-direction (unit) operation. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels. TAKE-UP: Catenary type located at discharge end. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves. BELT SPEED: 60 FPM, constant. FLOOR SUPPORT: Optional. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. ELECTRICAL CONTROLS: Optional |
|---|
700PB
Ideal for general goods transportation in applications such as packing, testing, inspecting and various assembly line operations. Belt tracking problems are eliminated with model 700PB.
| Specifications | BELTING: Series 900 flat top gray polypropylene belt, FDA approved belt. DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore. TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore. END DRIVE: Allows one-direction (unit) operation. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels. TAKE-UP: Catenary type located at discharge end. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves. BELT SPEED: 60 FPM, constant. FLOOR SUPPORT: Optional. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. ELECTRICAL CONTROLS: Optional |
|---|
700PB
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved