Model 297CDLR is specifically designed to transport heavy loads such as tote pans, castings, drums, pallet loads, etc. It is especially suited for carrying loads in the presence of oil and other such contaminates. This chain driven live roller includes 7 gauge tread rollers and structural steel frame as standard unit features.
| Specifications | TREAD ROLLERS: 2-9/16″ dia. x 7 ga. steel rollers, model 297S with sprockets. CHAIN DRIVE: Roller to roller with No. 60 roller chain. ROLLER CENTERS: 4-1/2″, 6″, 9″ or 12″. CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. BED: 4″ at 5.4 lbs. and 6″ at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports. SPEED: 35 FPM, constant. BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum). CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. BED LENGTHS (4-1/2″ or 9″ RC): Intermediate bed section lengths 3′-0″, 3′-9″, 4′-6″, 5′-3″, 6′-0″, 6′-9″, 7′-6″, 8′-3″, 9′-0″ and 9′-9″ increments. Minimum overall conveyor length with drive 5′-3″. Maximum overall conveyor length: 58′-6″ with 4-1/2″ RC; 78′-0″ with 9″ RC. BED LENGTHS (6″ or 12″ RC): Intermediate bed section lengths are available in 1′-0″ increments. Minimum overall conveyor length with drive 5′-0″. Maximum overall conveyor length 80′-0″. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. FLOOR SUPPORTS: Optional ELECTRICAL CONTROLS: Optional |
|---|
297CDLR
Model 297CDLR is specifically designed to transport heavy loads such as tote pans, castings, drums, pallet loads, etc. It is especially suited for carrying loads in the presence of oil and other such contaminates. This chain driven live roller includes 7 gauge tread rollers and structural steel frame as standard unit features.
| Specifications | TREAD ROLLERS: 2-9/16″ dia. x 7 ga. steel rollers, model 297S with sprockets. CHAIN DRIVE: Roller to roller with No. 60 roller chain. ROLLER CENTERS: 4-1/2″, 6″, 9″ or 12″. CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. BED: 4″ at 5.4 lbs. and 6″ at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports. SPEED: 35 FPM, constant. BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum). CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. BED LENGTHS (4-1/2″ or 9″ RC): Intermediate bed section lengths 3′-0″, 3′-9″, 4′-6″, 5′-3″, 6′-0″, 6′-9″, 7′-6″, 8′-3″, 9′-0″ and 9′-9″ increments. Minimum overall conveyor length with drive 5′-3″. Maximum overall conveyor length: 58′-6″ with 4-1/2″ RC; 78′-0″ with 9″ RC. BED LENGTHS (6″ or 12″ RC): Intermediate bed section lengths are available in 1′-0″ increments. Minimum overall conveyor length with drive 5′-0″. Maximum overall conveyor length 80′-0″. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. FLOOR SUPPORTS: Optional ELECTRICAL CONTROLS: Optional |
|---|
297CDLR
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MCS | Modular Connect System
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Singulation
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved