Model 700SBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35°. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.
| Specifications | BELTING: Black PVC rough-top. DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft, both crowned and fully lagged. TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft. CENTER DRIVE: Reversible drive with 24″ belt take-up. NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees. BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable. BELT SPEED: 60 FPM, constant. BED: 7″ x 12 ga. channel frame with 14 ga. slider bed. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. ELECTRICAL CONTROLS: Optional |
|---|
700SBF
Model 700SBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35°. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.
| Specifications | BELTING: Black PVC rough-top. DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft, both crowned and fully lagged. TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft. CENTER DRIVE: Reversible drive with 24″ belt take-up. NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees. BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable. BELT SPEED: 60 FPM, constant. BED: 7″ x 12 ga. channel frame with 14 ga. slider bed. FLOOR SUPPORTS: Optional MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. ELECTRICAL CONTROLS: Optional |
|---|
700SBF
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Barrel Conveyors
Glass & Solar Handling
Heavy Duty Conveyors
laundry
Lumber
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved