SZA251CDA | Chain Driven Zero Pressure Accumulator SMART ZONE® Heavy Duty Conveyor

Category: Accumulation Conveyors

Description
Specs

SZA251CDA SMART ZONE® is a heavy duty roll-to-roll chain driven zero pressure accumulator, designed to safely accumulate heavy products such as castings, drums, containers and heavy pallet loads in 5’ zones. The Roach design incorporates photo electric sensors-instead of sensor rollers-which eliminates many of the problems associated with conveying wooden pallets. Products do not touch during accumulation and are singulated individually off of conveyor. SMART ZONE® is easy to install and simple to maintain.

Specifications	TREAD ROLLERS: 2.5 ” dia. x 11 ga., model 251S. CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain. CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor. CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units. ROLLER CENTERS: 4″ or 6″ RC ONLY. SPEED: 35 FPM, constant. ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max). BED: 7-1/2″ x 1-1/2″ x 7 ga. and 5 ” x 1-1/2″ x 7 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports. FLOOR SUPPORTS: Optional BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal. FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. CAPACITY: 1000 lbs./ft. up to a maximum of 3000 lb. pallet load. ELECTRICAL CONTROLS: Optional

Specifications

TREAD ROLLERS: 2.5 ” dia. x 11 ga., model 251S.

CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.

CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor.

CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.

ROLLER CENTERS: 4″ or 6″ RC ONLY.

SPEED: 35 FPM, constant.

ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max).

BED: 7-1/2″ x 1-1/2″ x 7 ga. and 5 ” x 1-1/2″ x 7 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.

FLOOR SUPPORTS: Optional

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.

FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 1000 lbs./ft. up to a maximum of 3000 lb. pallet load.

ELECTRICAL CONTROLS: Optional

SZA251CDA

Description
Specs

Specifications	TREAD ROLLERS: 2.5 ” dia. x 11 ga., model 251S. CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain. CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor. CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units. ROLLER CENTERS: 4″ or 6″ RC ONLY. SPEED: 35 FPM, constant. ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max). BED: 7-1/2″ x 1-1/2″ x 7 ga. and 5 ” x 1-1/2″ x 7 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports. FLOOR SUPPORTS: Optional BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal. FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure. MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. CAPACITY: 1000 lbs./ft. up to a maximum of 3000 lb. pallet load. ELECTRICAL CONTROLS: Optional

Specifications

TREAD ROLLERS: 2.5 ” dia. x 11 ga., model 251S.

CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.

CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor.

CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.

ROLLER CENTERS: 4″ or 6″ RC ONLY.

SPEED: 35 FPM, constant.

ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max).

BED: 7-1/2″ x 1-1/2″ x 7 ga. and 5 ” x 1-1/2″ x 7 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.

FLOOR SUPPORTS: Optional

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.

FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 1000 lbs./ft. up to a maximum of 3000 lb. pallet load.

ELECTRICAL CONTROLS: Optional

SZA251CDA

SZA251CDA | Chain Driven Zero Pressure Accumulator SMART ZONE® Heavy Duty Conveyor

Standard Conveyors

Specialty Conveyors

Contact Us

Sales: 800-797-7631

Fax: 870-483-7049

808 Hwy 463, Trumann, AR 72472

SZA251CDA | Chain Driven Zero Pressure Accumulator SMART ZONE® Heavy Duty Conveyor

Standard Conveyors

Accumulation Conveyors(9)

Belt Conveyors(10)

Belt Driven Live Roller(7)

Chain Drag(5)

Chain Driven Live Roller(11)

Flexible Conveyors(2)

Gravity Conveyors(19)

Line Shaft(9)

MCS | Modular Connect System(1)

MDZ | Motor Driven Zone Accumulator(2)

Parts Conveyor(3)

Plastic Belt(9)

Powered Roller(13)

Singulation(1)

Slat Conveyors(2)

Transfers(8)

Wire Mesh Belt(4)

Specialty Conveyors

Barrel Conveyors(3)

Glass & Solar Handling(8)

Heavy Duty Conveyors(16)

Laundry(11)

Lumber & Door(5)

MDR | Motor Driven Roller Smart Conveyors(6)

Sortation Conveyors(7)

Special Transfers(11)

Stackers | Destackers(2)

Stops | Barriers | Walkovers(10)

Tabletop Chain Conveyors(5)

Transfer Carts(9)

Turntables(17)

Vertical Conveyors(8)

Wheel & Tire Conveyors(4)

Contact Us

Sales: 800-797-7631

Fax: 870-483-7049

808 Hwy 463, Trumann, AR 72472

Accumulation Conveyors⁽⁹⁾

Belt Conveyors⁽¹⁰⁾

Belt Driven Live Roller⁽⁷⁾

Chain Drag⁽⁵⁾

Chain Driven Live Roller⁽¹¹⁾

Flexible Conveyors⁽²⁾

Gravity Conveyors⁽¹⁹⁾

Line Shaft⁽⁹⁾

MCS | Modular Connect System⁽¹⁾

MDZ | Motor Driven Zone Accumulator⁽²⁾

Parts Conveyor⁽³⁾

Plastic Belt⁽⁹⁾

Powered Roller⁽¹³⁾

Singulation⁽¹⁾

Slat Conveyors⁽²⁾

Transfers⁽⁸⁾

Wire Mesh Belt⁽⁴⁾

Barrel Conveyors⁽³⁾

Glass & Solar Handling⁽⁸⁾

Heavy Duty Conveyors⁽¹⁶⁾

Laundry⁽¹¹⁾

Lumber & Door⁽⁵⁾

MDR | Motor Driven Roller Smart Conveyors⁽⁶⁾

Sortation Conveyors⁽⁷⁾

Special Transfers⁽¹¹⁾

Stackers | Destackers⁽²⁾

Stops | Barriers | Walkovers⁽¹⁰⁾

Tabletop Chain Conveyors⁽⁵⁾

Transfer Carts⁽⁹⁾

Turntables⁽¹⁷⁾

Vertical Conveyors⁽⁸⁾

Wheel & Tire Conveyors⁽⁴⁾