RBT3 Conveyor

TRANSFER ARM: 10 ga. formed channel.

TRANSFER BELT: 3/8" dia. round polyurethane belt.

LENGTHS: Transfer designed to mount in 796LS line shaft conveyors 15"-39" BF.

BELT CENTERS: 12"

ONE DIRECTION FLOW: Transfers product in one direction.

TAKE-UP: Adjustable sheaves provides take-up of transfer belt.

BEARINGS: Heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: Driven at 150% of speed as powered section transfer is mounted in.

LIFT: 3/4" positive lift.

MOTOR DRIVE: Optional.

CAPACITY: 100 lbs.

AIR CONTROLS: Air cylinder with single solenoid valve.

FLOOR SUPPORTS: Optional

NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.